Olympus E-3 - Manual (Page 67)

67
EN
5
Reco
rd
mo
de, wh
ite b
ala
nc
e, and pi
cture
mode
You can select image tone to create unique image effects. You can also fine-adjust image
parameters such as contrast and sharpness for each mode. The adjusted parameters are
recorded in each picture effect mode.
[ hVIVID] : Produces vivid colors.
[ iNATURAL] : Produces natural colors.
[ jMUTED] : Produces flat tones.
[ZPORTRAIT] : Produces beautiful skin tones.
[MONOTONE] : Produces black and white tone.
[CUSTOM]
: Select one picture mode, set the parameters, and register the setting.
You can also register the gradation to [CUSTOM]. This setting is set
separately from [GRADATION] in the menu.
g“Gradation” (P. 68)
The adjustable parameters are classified according to the
picture modes.
The individual parameters are as follows.
[CONTRAST] : Distinction between light and dark
[SHARPNESS] : Sharpness of the image
[SATURATION] : Vividness of the color
[B&W FILTER] : Creates a black and white image. The
filter color is brightened and the
complementary color is darkened.
[N: NEUTRAL] : Creates a normal black and white
image.
[Ye: YELLOW] : Reproduces clearly defined white
cloud with natural blue sky.
[Or: ORANGE] : Slightly emphasizes colors in blue
skies and sunsets.
[R: RED] : Strongly emphasizes colors in
blue skies and brightness of
crimson foliage.
[G: GREEN] : Strongly emphasizes colors in red
lips and green leaves.
[PICT. TONE] : Colors the black and white image.
[N: NEUTRAL] : Creates a normal black and white
image.
[S: SEPIA] : Sepia
[B: BLUE] : Bluish
[P: PURPLE] : Purplish
[G: GREEN] : Greenish
Picture mode
Super control panel i p: [PICTURE MODE]
Menu MENU[W]
[PICTURE MODE]
CARD SETUP
CUSTOM RESET
PICTURE MODE
GRADATION
WB
CANCEL SELECT GO
PICTURE MODE
jMUTED
iNATURAL
ZPORTRAIT
MONOTONE
hVIVID
CONTRAST
SHARPNESS
SATURATION
iNATURAL
CANCEL SELECT GO
Lo Hi
Lo Hi
Lo Hi
Lo
00
Hi
CONTRAST
CANCEL SELECT GO
s0011_e_00_0_unified.book Page 67 Wednesday, September 12, 2007 4:46 PM