Olympus E-3 - Manual (Page 99)

99
EN
8
Customizing your camera
[AUTO]
Even when a new card is inserted, the folder numbers are retained from the previous
card. If the new card contains an image file whose file number coincides with one
saved on the previous card, the new card’s file numbers start at the number following
the highest number on the previous card.
[RESET]
When a new card is inserted, folder numbers start at 100 and file numbers start at
0001. If a card containing images is inserted, the file numbers start at the number
following the highest file number on the card.
• When both the Folder and File No. reach their respective maximum number (999/9999), it is not
possible to store additional pictures even if the card is not full. No more pictures can be taken.
Replace the card with a new one.
PRIORITY SET
You can customize the initial position of the cursor ([YES] or [NO]) on the [ALL ERASE] or
[FORMAT] screen.
dpi SETTING
You can set the resolution for printing images in advance. The set value is recorded on the
card with the images.
[AUTO] Automatically set according to the image size.
[CUSTOM] You can make the desired setting. Press d to display the setting screen.
Custom Menu 1i K UTILITY
EXT. WB DETECT
You can disable the white balance sensor used to determine the light source during auto
white balance. This is useful when the light source near the sensor and the light source
illuminating the subject are different.
Custom Menu 2
CF/xD
You can select which card to use when both a CompactFlash and xD-Picture Card are
loaded.
EDIT FILENAME
You can rename image files to make them easier to identify and organize.
The portion of the filename that can be changed depends on the color space.
g“COLOR SPACE” (P. 97)
s (Monitor brightness adjustment)
You can adjust the brightness of the monitor for optimal viewing.
[AUTO] This allows the illumination sensor to measure the surrounding brightness
and automatically adjust the monitor for optimal viewing.
[+7] – [-7] Use ac to adjust the monitor brightness.
sRGB : Pmdd0000.jpg AdobeRGB : _mdd0000.jpg
You can change the character to OFF, A - Z
or 0 - 9.
s0011_e_00_0_unified.book Page 99 Wednesday, September 12, 2007 4:46 PM