Olympus 840 - Manual (Page 18)

But
ton operat
ions
18
EN
Press
q in shooting mode to switch to playback mode and display the last picture taken.
Press
q again or press the shutter button halfway to return to shooting mode.
g “q Viewing still pictures/Selecting playback mode” (P.13)
When a printer is connected to the camera, display the picture you want to print in playback
mode and press
P.
g“EASY PRINT” (P.40)
Press
f in shooting mode to turn ON or OFF Shadow Adjustment Technology. Press e
for setting. A frame is displayed on the monitor around your subject’s face (except for
n).
This function makes the subject’s face appear brighter, even against strong backlighting,
and adjusts the background to ensure proper exposure of your picture.
• It may take a few seconds until the frame is displayed on the monitor.
• The faces may not be detected depending on the subject.
• When [ON] is selected, the following setting restrictions apply.
• [ESP/n] is fixed at [ESP].
• [AF MODE] is fixed at [FACE DETECT].
• [PANORAMA] cannot be set.
• You can also use Shadow Adjustment Technology to compensate for backlighting in shot
still pictures.
g “PERFECT FIX Editing images” (P.30)
In playback mode, select the picture you want to erase, and press
S.
• Once erased, pictures cannot be restored. Check each picture before erasing to avoid
accidentally erasing pictures you want to keep.
g “0 Protecting pictures” (P.32)
Holding down
f/S in shooting mode brightens the monitor for 10 seconds with the
brightest setting in [s].
g “s Adjusting the brightness of monitor” (P.37)
b q / P button
Viewing pictures/Printing pictures
q Viewing pictures immediately
P Printing pictures
c f /S button
Brightening the subject against backlight/Erasing pictures/
Brightening the monitor (Backlight boost)
f Brightening the subject against backlight
OFF Shadow Adjustment Technology is deactivated.
ON Shadow Adjustment Technology is activated.
S Erasing pictures
Brightening the monitor