Shooting tips, Focusing on the subject, Subjects that are difficult to focus on – Olympus 840 User Manual

Page 52: Prevent blur by using image stabilization, Taking stabilized pictures without the flash

Advertising
background image

Get

ti

ng t

o

k

now

y

our camera bet

ter

52

EN

There are several ways to focus, depending on the subject.

When the subject is not in the center of the frame

• Place the subject in the center of the frame, lock the focus on the subject, and then recompose

your picture.

• Set [AF MODE] to [iESP].

g “AF MODE Changing the focusing area” (P.28)

The subject is moving quickly

• Focus the camera on a point roughly the same distance away as the subject you want to

shoot and lock the focus (by pressing the shutter button halfway). Then recompose your
picture and press the shutter button completely as the subject enters the frame.

• Under certain types of conditions, it is difficult to focus using Auto focus.

In these cases, focus (focus lock) on an object with high contrast at the same distance as
the intended subject, recompose your shot and then take the picture. If the subject has
no vertical lines, hold the camera vertically and focus the camera using the focus lock
function by pressing the shutter button halfway, and then return the camera to the
horizontal position while keeping the button pressed halfway and take the picture.

Be sure to hold the camera firmly with both hands and press the shutter button slowly so as
to avoid moving the camera. You can also reduce the blurring by using the image
stabilization function during shooting.

g “IMAGE STABILIZER (still picture)/DIS MOVIE MODE (movie) “Shooting pictures using

image stabilization” (P.28)

Pictures are more likely to be blurry when:

• images are shot at a high-magnification zoom setting, i.e. using both optical zoom and

digital zoom functions,

• the object is dark and the shutter speed is slow, or
• scene modes where the flash is turned off and/or the shutter speed is slow.

The flash is activated automatically when there is insufficient light, or when the camera is
shaken. To take pictures with no flash in dark places, set the flash mode to [

$] and set as

follows:

Increase the [ISO] setting

g “ISO Changing the ISO sensitivity” (P.26)

Shooting tips

Focusing on the subject

Subjects that are difficult to focus on

Prevent blur by using image stabilization

Taking stabilized pictures without the flash

Subject with low
contrast

Subject with an extremely
bright area in the center
of the frame

Subject without
vertical lines

Subjects at
different distances

Fast-moving
subject

The subject is not in the
center of the frame

Advertising