Adding sound to still pictures, Erase selected pictures/erase all pictures, Erase by selecting the single-frame – Olympus 840 User Manual

Page 33: Men u operat ions, 7 erase, Sel. image, All erase

Advertising
background image

Men

u operat

ions

EN

33

Select a picture with

43, and use 12 to select [U+90°], [V0°], or [T-90°]. You can rotate

several frames in succession.

Sound is recorded for about 4 seconds.
• Select a picture with

43, and select [YES] with 12, then

press

e to begin recording.

• The [BUSY] bar will be temporarily displayed.

Protected pictures cannot be erased. Cancel protection before erasing protected pictures.
Once erased, pictures cannot be restored. Check each picture before erasing to avoid
accidentally erasing pictures you want to keep.
• When erasing the picture in the internal memory, do not insert the card into the camera.
• When erasing the picture from the card, insert a card into the camera in advance.
• You can confirm on the monitor whether the internal memory or card is being used.

g“Using the internal memory or card” (P.64)

• Use the arrow pad to select the picture, and press

e to add R.

• Press

e again to cancel the selection.

• When all individual pictures to be erased have been marked,

press

f/S.

• Select [YES], and press

e.

• Select [YES], and press

e.

R ............................................................................

Adding sound to still pictures

YES / NO

7 ERASE

Erase selected pictures/Erase all pictures

SEL. IMAGE....................................................

Erase by selecting the single-frame

ALL ERASE .........................

Erase all the pictures in the internal memory and the card

OK

EXIT

y

+90°

EXIT

OK

y

-90°

EXIT

OK

y

MENU

BACK

OK

SET

YES

NO

R

1

4

2

5

3

6

OK

S

MENU

BACK

GO

SEL. IMAGE

IN

e card

Advertising