Olympus 840 - Manual (Page 32)

Men
u operat
io
ns
32
EN
This function lets you select a calendar format, integrate the calendar with a picture, and
save it as a new file.
• Select the picture with
43 and press e.
• Select the calendar with
43, and press e (Press 12 to
turn the picture 90 degrees clockwise or 90 degrees
counterclockwise) .
• Set the date of the calendar, and press
e.
• This function cannot be used when the panoramic picture is
selected.
This function extracts 9 frames from a movie and saves them as a new picture (INDEX)
containing thumbnails of each frame.
• Select a movie with
43, and press e.
• The [BUSY] bar will be temporarily displayed.
This function allows you to save printing data (the number of prints and the date and time
information) with the pictures stored on the card.
g“Print settings (DPOF)” (P.43)
Protected pictures cannot be erased with [ERASE], [SEL.
IMAGE], or [ALL ERASE], but they are all erased by formatting.
• Select the picture with
43, and protect it by selecting [ON]
with
12. You can protect several frames in succession. 9
is displayed when the picture is protected.
Pictures taken with the camera held vertically are displayed horizontally during playback.
This function lets you rotate such pictures so that they are displayed vertically on the monitor,
and the new picture orientations will be saved even after the power is turned off.
CALENDAR ...................................................... Create a calendar print with a picture
INDEX .............................................................. Making an index picture from a movie
5 PRINT ORDER
Making print reservations (DPOF)
6 PLAYBACK MENU
0 ...........................................................................................
Protecting pictures
OFF / ON
y ................................................................................................
Rotating pictures
U+90° / V0° / T-90°
CALENDAR
OK SET
INDEX
MENU BACK SET OK
ON
OFF
EXIT OK
0