Olympus 840 - Manual (Page 27)

Men
u operat
ions
EN
27
You can take a sequence of pictures at one time by holding down the shutter button. The
camera will take pictures continuously until you release the shutter button.
• When [
W ] is selected, the following setting restrictions apply.
This function allows you to zoom up to 25x by combining the optical zoom and image
cropping. This function will not reduce the image quality since it does not convert the data
with fewer pixels into the data with larger pixels.
• The available zoom factor varies depending on the [IMAGE QUALITY] setting.
• [IMAGE SIZE] is limited to [
H] and lower.
The digital zoom can be used to take close-up shots with stronger magnification when
combined with optical zoom. (Optical Zoom × Digital Zoom: maximum 28×)
• This function cannot be set when [FINE ZOOM] is [ON].
DRIVE ........................................................... Using sequential (continuous) shooting
o Shoots 1 frame at a time when the shutter button is pressed.
j Focus and exposure are locked at the first frame. The sequential shooting
speed varies depending on the image quality setting.
W
Pictures can be taken at a faster speed than normal sequential shooting.
FINE ZOOM ....................... Zooming in on your subject without reducing image quality
OFF / ON
DIGITAL ZOOM ......................................................... Zooming in on your subject
OFF / ON
e
W W TT
P
4 4
IN
8 M 8 M W W TT
P
4 4
IN
8 M 8 M
Zoom bar
White area: The optical zoom area
Yellow area: The digital zoom area
Optical zoom Digital zoom
• The flash mode is fixed at [
$].
• [ISO] is fixed at [AUTO].
• [IMAGE SIZE] is limited to [
I] and lower.
• [FINE ZOOM], [DIGITAL ZOOM] and [R] cannot be set.