Olympus SP-565 UZ - Manual (Page 22)

 EN
Using the flash
The flash functions can be selected to best
match the shooting conditions and render the
desired image.
1
Press the # button to flip up the
built-in flash.
# button
The flash settings cannot be adjusted with
the flash closed.
To turn off the flash
Press the flash down back into the camera.
This sets to $ (FLASH OFF) mode.
2
Press : .
P
OK
1/400 F3.5 1/400 F3.5
OK
AUTO ! # $ L N
AUTO
SET
FLASH AUTO
NR
3
Use 9: to select the setting option,
and press the o button to set.
Brightening the subject
against backlight
(SHADOW ADJ *1 )
The camera finds a person’s face that has been
darkened by backlight and makes it appear
brighter.
*1 Shadow adjustment technology
1
Press the f button.
P $ $ OFF
OK OK
OFF ON
SET
SHADOW ADJ
NR
2
Use 9: to select [ON], and press
the o button to set.
3
Point the camera toward the
subject. Check the frame appearing
around the face detected by the
camera, and then press the shutter
button to take the picture.
For some subjects, the frame may not
appear or may take some time to appear.
[METERING] (p. 35) is automatically
fixed to [ESP], and [AF MODE] (p. 36) is
automatically fixed to [FACE DETECT].
[i] is automatically switched to [j].
Also, in sequential shooting, this function
is applied only to the first frame. [DRIVE]
(p. 34)