Olympus SP-565 UZ - Manual (Page 75)

 EN
Camera shake
“Taking pictures without camera shake”
Taking pictures using [IMAGE STABILIZER]
(p. 37)
The CCD
*1 shifts to correct for camera shake even
if the ISO speed is not increased. This function is
also effective when taking pictures at a high zoom
magnification.
*1 An image pickup device that absorbs incoming
light through the lens and changes it to
electronic signals.
Set to S mode or [CSPORT] in shooting mode
Pictures can be taken at a high shutter speed,
which is effective even for motion of the subjects.
S
mode (p. 18)
[/ s] (p. 42)
Taking pictures using high ISO speed
If a high ISO speed is selected, pictures can be
taken at a high shutter speed even at locations
where a flash cannot be used.
[ISO] (p. 33)
Exposure (brightness)
“Taking pictures with the right
brightness”
Taking pictures of a subject against a backlight
A face against backlight is brightened.
[SHADOW ADJ] (p. 22)
Taking pictures using [FACE DETECT] for
[AF MODE] (p. 36)
Appropriate exposure is obtained for a face
against backlight, and the face is brightened.
●
●
●
●
●
Taking pictures using [n] for [METERING]
(p. 35)
The brightness is adjusted according to the subject
in the center of the screen without being influenced
by the background light.
Taking pictures using [#FILL IN] (p. 23) flash
A subject against backlight is brightened.
Taking pictures of a white beach or snow scene
Set the mode to [Z BEACH] or [a SNOW].
(p. 42)
Taking pictures using exposure compensation
(p. 23)
Adjust the brightness while viewing the screen
for taking the picture. Normally, taking pictures of
white subjects (such as snow) results in images
that are darker than the actual subject. Use the
F button to adjust in the positive (+) direction to
express whites as they appear.
When taking pictures of black subjects, on the
other hand, it is effective to adjust in the negative
(-) direction.
Image colors
“Taking pictures with colors at the same
shade as they appear”
Taking pictures by selecting [WB] (p. 32)
Best results in most environments can normally
be obtained with the AUTO setting, but for some
subjects, you should try experimenting with
different settings. (This is especially true for
sunshade under a clear sky, mixed natural and
artificial light settings, and so on.)
●
●
●
●
●