Olympus SP-565 UZ - Manual (Page 80)

0 EN
Using a microSD Attachment
Do not use the attachment with Olympus
digital cameras that do not support this
microSD Attachment, as well as with other
brands of digital cameras, computers,
printers and other devices that support
xD-Picture Card. Doing so not only may
damage the pictures taken, but may also
result in the malfunction of the device.
If the microSD card cannot be removed,
do not use force. Contact authorized
distributors/service centers.
Cards compatible with this camera
microSD card
microSDHC card
For a list of tested microSD cards, please
visit our website (http://www.olympus.com/).
Sending images
You can send images to a computer or
printer by using the USB cable provided with
the camera.
To send data to other devices, remove
the attachment from the camera and use
a commercially available microSD card
adapter.
Handling precautions
Do not touch the contact area of the
attachment or microSD card. Doing so
may cause failure in reading the images.
When fingerprints or stains are found on
the contact area, wipe the area with a soft
dry cloth.
Taking pictures with the
Olympus Wireless RC Flash
System
You can take pictures with a wireless flash
when using a flash compatible with the Olympus
Wireless RC Flash System. This enables
multi-flash photography using multiple flash
units compatible with this system. The camera’s
built-in flash is used for communication between
the camera and flash.
For details about operation of a wireless
flash, refer to the instruction manual for the
special external flash.
1
Set the wireless flash based on the
guidelines below.
Wireless flash setup range guidelines
The setup range varies depending on the
ambient environment.
5m
50°
50°
10m
30°
30°
50°
50°
30°
30°
Point the remote
sensor toward
the camera
Flash direction
2
Turn on the wireless flash.
3
Use the MODE button on the
wireless flash to set to RC mode,
and make the channel and group
settings.
The group is set to A. (The B and C settings do
not work.)
4
Turn on the camera, and press the
# button to flip up the built-in flash.
5
Set [QFLASH] (p. 38) on the
camera to [#RC], and set the
channel (CH1 to CH4) to the same
setting as the wireless flash.
●