Olympus SP-565 UZ - Manual (Page 62)

 EN
Registering a set of shooting settings under my mode labels [MY MODE SETUP]
x SETUP  MY MODE SETUP
By referring to the “Application” column, select the registration method (submenu 2) and the desired
my mode label (submenu 3) and then adjust any settings.
Submenu 2 Submenu 3 Submenu 4 Application
CURRENT
s MY MODE 1/
E MY MODE 2/
c
MY MODE 3/
d MY MODE 4
SET/CANCEL
[SET] sets the current menu function settings to the
selected my mode label (s/E/c/d).
RESET RESET/CANCEL
[RESET] returns the functions in the selected my
mode label to their defaults.
CUSTOM
(Register functions
individually)
The user can make any changes to a selected my
mode label setting.
When [CUSTOM] is selected, available function settings for the my mode registrations are follows;
[P/A/S/M/f] (p. 17 to 20) • [DRIVE] (p. 34) • [>] (p. 39) •
[F] (p. 23) • [FINE ZOOM] (p. 35) • [PICTURE MODE] (p. 39) •
[FNo.] (p. 17, 18) • [DIGITAL ZOOM] (p. 35) • [SHARPNESS] (p. 39) •
[SHUTTER] (p. 17, 18) • [METERING] (p. 35) • [CONTRAST] (p. 40) •
[FLASH MODE] (p. 22) • [AF MODE] (p. 36) • [SATURATION] (p. 40) •
[&] (p. 24) • [FOCUS MODE] (p.36) • [NOISE REDUCT.] (p. 40) •
[Y] (p. 24) • [FULLTIME AF] (p. 37) • [TIMELAPSE] (p. 41) •
[f] (p. 22) • [AF PREDICT] (p. 37) • [1] (p. 41) •
[MONITOR] • [AF ILLUMINAT.] (p. 37) • [INFO] (p. 25) •
[ZOOM] • [IMAGE STABILIZER] (p. 37) • [FRAME ASSIST] (p. 61) •
[IMAGE QUALITY] (p. 31) • [w] (p. 38) • [u] (p. 61) •
[WB] (p. 32) • [Q FLASH] (p. 38) •
[ISO] (p. 33) • [R] (p. 39) •
To select the display device used at
camera startup [MONITOR]
Select [CUSTOM] (submenu 2)  desired
my mode label (submenu 3)  [MONITOR]
(submenu 4), and then the display device
that shows the saved image or shooting
standby screen ([LCD] or [EVF]).
To select the zoom position at camera
startup [ZOOM]
Select [CUSTOM] (submenu 2)  desired
my mode label (submenu 3)  [ZOOM]
(submenu 4), and then a preset focal length
(angle of view) ([26mm], [50mm], [150mm],
[300mm] or [520mm]).
The focal length selected by [ZOOM] is
based on the equivalent value for 35mm
cameras.
To select the information display at
camera startup [INFO]
Select [CUSTOM] (submenu 2)  desired
my mode label (submenu 3)  [INFO]
(submenu 4), and then the desired
information display format at camera
startup ([OFF] (startup the camera with no
information), [ON] (startup the camera with
normal display), [FRAME ASSIST] (startup
the camera with grid) or [u] (startup the
camera with histogram)). “Changing the
shooting information display” (p. 25)