Olympus SP-565 UZ - Manual (Page 38)

 EN
Adjusting the flash intensity [ w ]
K CAMERA MENU  w
: P A S M r s
In certain situations, it is advisable to adjust the flash intensity, such as when shooting small subjects
or distant backgrounds. This function is also used when increased contrast is desired.
Submenu 2 Application
−2.0 to +2.0 Adjust the flash intensity for the shooting scene.
Using an external flash [ Q FLASH]
K CAMERA MENU  Q FLASH
: P A S M r s
Submenu 2 Submenu 3 Application
IN — The built-in flash is used for taking pictures.
# RC CH1 to CH4
An Olympus Wireless RC Flash System compatible flash is
used for taking pictures. The channel (CH1 to CH4) can be
selected.
SLAVE 1 to 10
The commercially-available slave flash that is synchronized
with the camera flash is used for taking pictures. The flash
intensity setting can be adjusted.
“Taking pictures with the Olympus Wireless RC Flash System” (p. 80)
When set to [SLAVE], the flash setting automatically changes to [# FILL IN] (p. 23).
When set to [SLAVE], the flash can fire when [DRIVE] (p. 34) is set to a setting other than [o], but if
the flash intensity is large, the interval between sequential shots becomes longer.