Olympus TG-820 - Manual (Page 11)

11 EN
Preparing the Camera Preparing the Camera
Inserting the battery and card
1
TG-820
3
21
2
Battery/card/connector
cover latch
Battery/card/connector cover
Lock knob
TG-620
3
1
2
Lock knob
Battery/card cover
2
TG-820 TG-620
TG-820
Write-protect switch Write-protect switch
TG-620
TG-820: Insert the battery as illustrated with the C
mark toward the battery lock knob.
TG-620: Insert the battery as illustrated with the B
mark toward the battery lock knob.
Damage to the battery exterior (scratches, etc.) may
produce heat or an explosion.
Insert the battery while sliding the battery lock knob in
the direction of the arrow.
Insert the card straight until it clicks into place.
Turn off the camera before opening the battery/card/
connector cover*.
When using the camera, be sure to close and lock
the battery/card/connector cover*.
Slide the battery lock knob in the direction of the
arrow to unlock, and then remove the battery.
Always use SD/SDHC/SDXC cards or Eye-Fi card
with this camera. Do not insert other types of memory
cards. “Using the card” (p. 65)
Do not touch the contact area of the card directly.
This camera can be used without a card by storing
images in its internal memory.
* TG-620: Battery/card cover and connector cover Battery lock knob
Battery lock knob
Battery/card
cover latch