Olympus TG-820 - Manual (Page 48)

48 EN
Adjusting the image processing Adjusting the image processing
function [Pixel Mapping]
function [Pixel Mapping]
d (Settings Menu 2)  Pixel Mapping
This function has already been adjusted at factory
shipping, and no adjustment is needed right
after purchase. Approximately once a year is
recommended.
For best results, wait at least one minute after taking
or viewing pictures before performing pixel mapping.
If the camera is turned off during pixel mapping, be
sure to perform it again.
To adjust the image processing function To adjust the image processing function
Press the A button when [Start] (Submenu 2) is
displayed.
● The check and adjustment of the image processing
function starts.
Adjusting the brightness of the monitor Adjusting the brightness of the monitor
[[s
s]]
d (Settings Menu 2)  s
To adjust the monitor brightness To adjust the monitor brightness
1 Use FG to adjust the brightness while viewing the
screen, and then press the A button.
MENU Back s
Playing back images on a TV [TV Out] Playing back images on a TV [TV Out]
d (Settings Menu 2)  TV Out
Submenu 2 Submenu 3 Application
NTSC/PAL
NTSC
Connecting the camera to a TV in North America, Taiwan, Korea, Japan,
and so on.
PAL Connecting the camera to a TV in European countries, China, and so on.
HDMI Out
480p/576p
720p
1080i
Set the signal format to be given priority. If the TV setting does not match,
it is changed automatically.
HDMI Control
Off Operate with the camera.
On Operate with the TV remote control.
The factory default settings differ according to the region where the camera is sold.