Olympus TG-820 - Manual (Page 17)

17 EN
Shooting with the optimum aperture
value and shutter speed (P mode)
In this mode, automatic shooting settings are activated
while also allowing changes to a wide range of
other shooting menu functions, such as exposure
compensation, white balance, etc. as needed.
The default settings of the function are highlighted in
.
1
Press the n button to turn on the camera.
P mode indicator
00:34 00:34
P P
0.0 0.0
AUTO
WB
AUTO
WB
AUTO
ISO
AUTO
ISO
12 M
4 4 N ORM
Number of storable still pictures (p. 67)
Monitor (standby mode screen)
If P mode is not displayed, press H to display the
function menu screen and then set the shooting
mode to P. “Using the Menu” (p. 8)
Current shooting mode display
P P
0.0 0.0
AUTO
WB
AUTO
WB
AUTO
ISO
AUTO
ISO
MENU MENU
12 M
Program Auto
2
Hold the camera and compose the shot.
Horizontal grip
Vertical grip
Monitor
When holding the camera, take care not to cover the
fl ash and microphone with your fi ngers, etc.
3
Press the shutter button halfway down to
focus on the subject.
● When the camera focuses on the subject, the
exposure is locked (shutter speed and aperture
value are displayed), and the AF target mark
changes to green.
● The camera was unable to focus if the AF target
mark fl ashes red. Try focusing again.
Shooting, Playback, and Erasing Shooting, Playback, and Erasing