Olympus TG-820 - Manual (Page 38)

38 EN
Reducing the blur caused by the Reducing the blur caused by the
camera shake when shooting
camera shake when shooting
[Image Stabilizer] (still images)/
[Image Stabilizer] (still images)/
[IS Movie Mode] (movies)
[IS Movie Mode] (movies)
z (Camera Menu 1)
Image Stabilizer (still images)/
A (Movie Menu)  IS Movie Mode (movies)
Submenu 2 Application
Off
The image stabilizer is deactivated.
This is recommended for shooting
when the camera is fi xed in place on
a tripod or other stable surface.
On The image stabilizer is activated.
Default setting
[Image Stabilizer] [On], [IS Movie Mode] [Off]
There may be a noise coming from inside the camera
when the shutter button is pressed with [Image
Stabilizer] (still images) set to [On].
Images may not be stabilized if camera shake is too
severe.
When the shutter speed is extremely slow, such as
when taking pictures at night, [Image Stabilizer] (still
images) may not be as effective.
Viewing the image immediately after Viewing the image immediately after
shooting [Rec View]
shooting [Rec View]
z (Camera Menu 2)  Rec View
Submenu 2 Application
Off
The image being recorded is not
displayed. This allows the user
to prepare for the next shot while
following the subject in the monitor
after shooting.
On
The image being recorded is
displayed. This allows the user to
make a brief check of the image that
was just taken.
Automatically rotating images shot with Automatically rotating images shot with
the camera in a vertical position during
the camera in a vertical position during
playback [Pic Orientation]
playback [Pic Orientation]
(TG-820 only) (TG-820 only)
z (Camera Menu 2)  Pic Orientation
During shooting, the [y] (p. 43) setting on the
playback menu is set automatically.
This function may not work properly if the camera is
facing up or down during shooting.