Olympus TG-820 - Manual (Page 37)

37 EN
Selecting the focusing area [AF Mode] Selecting the focusing area [AF Mode]
z (Camera Menu 1)  AF Mode
Submenu 2 Application
Face/iESP
The camera focuses automatically.
(If a face is detected, it is shown by
a white frame
*1 ; when the shutter
button is pressed halfway and the
camera focuses, the frame turns to
green
*2 . If no face is detected, the
camera chooses a subject in the
frame and focuses automatically.)
Spot
The camera focuses on the subject
located within the AF target mark.
AF Tracking
The camera tracks the subject
movement automatically to focus on
it continuously.
*1 For some subjects, the frame may not appear or may
take some time to appear.
*2 If the frame blinks in red, the camera cannot focus. Try
refocusing on the subject.
To focus on a moving subject To focus on a moving subject
continuously (AF Tracking)
continuously (AF Tracking)
1 Hold the camera to align the AF target mark on the
subject and press the A button.
2 When the camera recognizes the subject, the AF
target mark automatically tracks the subject movement
to focus on it continuously.
3 To cancel the tracking, press the A button.
Depending on the subjects or the shooting conditions,
the camera may be unable to lock the focus or fail to
track the subject movement.
When the camera fails to track the subject movement,
the AF target mark changes to red.
Selecting the method for measuring the Selecting the method for measuring the
brightness [ESP/
brightness [ESP/n n]]
z (Camera Menu 1)  ESP/n
Submenu 2 Application
ESP
Shoots to obtain a balanced
brightness over the entire screen
(Meters the brightness at the center
and surrounding areas of the screen
separately).
5 (spot)
Shoots the subject at the center
during backlighting (Meters the
brightness at the center of the
screen).
When set to [ESP], the center may appear dark when
shooting against strong backlighting.
Shooting at higher magnifi cations than Shooting at higher magnifi cations than
optical zoom [Digital Zoom]
optical zoom [Digital Zoom]
z (Camera Menu 1)  Digital Zoom
Submenu 2 Application
Off Disable digital zoom.
On Enable digital zoom.
[Digital Zoom] is not available when [a Super
Macro] or [N S-Macro LED] (p. 30) is selected.
The option selected for [Digital Zoom] affects the
appearance of the zoom bar.
“To take larger images” (p. 19)