Pioneer DEH-X8600BT - Manual (Page 16)

Black plate (16,1)
Answering a call waiting
1 When a call is received, press
.
Switching between callers on hold
1 Press M.C.
Canceling call waiting
1 Press and hold
.
Adjusting the other party ’s listening volume
1 Turn LEVER while talking on the phone.
! When private mode is on, this function is not
available.
Turning private mode on or off
1 Press BAND/ while talking on the phone.
Note
If private mode is selected on the cellular phone,
hands-free phoning may not be available.
Using voice recognition
This feature can be used on an iPhone
equipped with voice recognition that is con-
nected by Bluetooth.
1 Press and hold M.C. to switch to voice
recognition mode.
2 Press M.C. and then talk into the micro-
phone to input voice commands.
To end voice recognition mode, press
BAND/
.
Notes
! For details on voice recognition features,
check the manual for your iPhone.
! In order for your voice commands to be recog-
nized and interpreted correctly, ensure that
conditions are suitable for recognition.
! Please note that wind blowing through the ve-
hicle windows and noise coming from outside
the vehicle can interfere with voice command
operation.
! For optimum pick-up, the microphone should
be placed directly in front of the driver at a sui-
table distance.
! Speaking too soon after the start of the com-
mand may cause voice recognition to fail.
! Speak slowly, deliberately, and clearly.
Connection menu operation
Important
Connected devices may not work properly if more
than one Bluetooth device is connected at a time
(e.g. a phone and a separate audio player are
connected simultaneously).
1 Press and hold to display the con-
nection menu.
# You cannot perform this step during a call.
2 Turn M.C. to select the function.
Once selected, the following functions can be
adjusted.
Device list (connecting or disconnecting a device
from the device list)
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the name of a device you want
to connect/disconnect.
! Press and hold M.C. to swap between the
Bluetooth device address and the device
name.
3 Press M.C. to connect/disconnect the selected de-
vice.
Once the connection is established,
Connected
is displayed.
! When no device is selected in the device list, this
function is not available.
Delete device (deleting a device from the device list)
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the name of a device you want
to delete.
! Press and hold M.C. to swap between the
Bluetooth device address and the device
name.
3 Press M.C. to display Delete YES.
4 Press M.C. to delete the device information from
the device list.
! When no device is selected in the device list, this
function is not available.
! While this function is in use, do not turn off the
engine.
Add device (connecting a new device)
<QRB3358-A>16
En
16
Section
02 Using this unit