Pioneer DEH-X8600BT - Manual (Page 7)

Black plate (7,1)
Returning to the ordinary display from the list/cate-
gory
1 Press BAND/ .
Selecting a function or list
1 Turn M.C. or LEVER.
! In this manual, “Turn M.C.” is used to describe
the operation used to select a function or list.
Radio
Basic operations
c a b
3 6 8 1 2 9 7 45
RDS
d
3 6 8 1 2 9 7 45
Non-RDS or MW/LW
1 TAG indicator
2 Tags transferring indicator
3 Band indicator
4 News indicator
5 Traffic Announce indicator
6 5 (stereo) indicator
7 Preset number indicator
8 LOC indicator
Appears when local seek tuning is on.
9 Signal level indicator
a TEXT indicator
Shows when the radio text is received.
b PTY label indicator
c Program service name
d Frequency indicator
Selecting a band
1 Press BAND/ until the desired band (FM-1, FM-
2,FM-3 for FM or MW/LW) is displayed.
Manual tuning (step by step)
1 Turn LEVER.
! Select Manual (manual tuning) under Tuning
Mode to use this function.
Switching preset stations
1 Turn LEVER.
! Select Preset (preset channel) under Tuning
Mode to use this function.
Seeking
1 Turn and hold down LEVER.
! While turning and holding down LEVER, you can
skip stations. Seek tuning starts as soon as you
release
LEVER.
Note
For details about Tuning Mode, refer to
Tuning Mode (LEVER tuning setting) on page 9.
Using PI Seek
If the tuner cannot find a suitable station, or
the reception status deteriorates, the unit
automatically searches for a different station
with the same programming. During the
search,
PI SEEK is displayed and the sound is
muted.
Using Auto PI Seek for preset
stations
When preset stations cannot be recalled, the
unit can be set to perform PI Seek during pre-
set recall.
! The default setting for Auto PI Seek is off.
Refer to Auto PI (auto PI seek) on page 26.
Storing and recalling stations
for each band
1 Press (list).
The preset screen is displayed.
<QRB3358-A>7
En
7
Section
02
Using
this
unit
Using this unit