Pioneer DEH-X8600BT - Manual (Page 9)

Black plate (9,1)
Function settings
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select FUNCTION.
3 Turn M.C. to select the function.
Once selected, the following functions can be
adjusted.
! If MW/LW band is selected, only BSM,
Local and Tuning Mode are available.
FM Setting (FM sound quality settings)
The sound quality level can be set to match the broad-
cast signal conditions of the FM band signal.
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the desired setting.
! Standard – This is the standard setting.
! Hi-Fi – This is the setting to use to prioritize
the high quality of stereo sound.
! Stable – This is the setting to use to prioritize
the low noise of monaural sound.
BSM (best stations memory)
BSM (best stations memory) automatically stores the
six strongest stations in the order of their signal
strength.
1 Press M.C. to turn BSM on.
To cancel, press M.C. again.
Regional (regional)
When Alternative FREQ is used, the regional func-
tion limits the selection of stations to those broad-
casting regional programs.
1 Press M.C. to turn the regional function on or off.
Local (local seek tuning)
Local seek tuning allows you to tune in to only those
radio stations with sufficiently strong signals for good
reception.
1 Press M.C. to display the setting mode.
2 Press M.C. to turn local on or off.
3 Turn M.C. to select the desired setting.
FM: Level 1 —Level 2—Level 3—Level 4
MW/LW: Level 1 —Level 2
The highest level setting allows reception of only
the strongest stations, while lower levels allow the
reception of weaker stations.
PTY search (program type selection)
You can tune in to a station using PTY (program type)
information.
1 Press M.C. to display the setting mode.
2 Turn LEVER left or right to select the desired set-
ting.
News&Inf
—Popular—Classics—Others
3 Press M.C. to begin the search.
The unit searches for a station broadcasting that
type of program. When a station is found, its pro-
gram service name is displayed.
! To cancel the search, press M.C. again.
! The program of some stations may differ from
that indicated by the transmitted PTY.
! If no station is broadcasting the type of pro-
gram you searched for, Not found is dis-
played for about two seconds and then the
tuner returns to the original station.
Traffic Announce (traffic announcement standby)
1 Press M.C. to turn traffic announcement standby
on or off.
Alternative FREQ (alternative frequencies search)
When the tuner cannot get a good reception, the unit
automatically searches for a different station in the
same network.
1 Press M.C. to turn the alternative frequencies
search on or off.
News interrupt (news program interruption)
1 Press M.C. to turn the NEWS function on or off.
Tuning Mode (LEVER tuning setting)
You can assign a function to the LEVER on the unit.
Select Manual (manual tuning) to tune up or down
manually or select Preset (preset channel) to switch
between preset channels.
1 Press M.C. to select Manual or Preset.
<QRB3358-A>9
En
9
Section
02
Using
this
unit
Using this unit