Pioneer DEH-X8600BT - Manual (Page 6)

Black plate (6,1)
DEH-X9600BT
Removing the front panel
1 Press the open button to open the front panel.
2 Grip the left side of the front panel and pull it
gently outward.
Take care not to grip it too tightly or to drop the
front panel and protect it from contact with water
or other fluids to prevent permanent damage.
3 Always store the detached front panel in a protec-
tive case or bag.
Re-attaching the front panel
1 Reattach the front panel by holding it upright to
the unit and clipping it securely into the mount-
ing hooks.
DEH-X8600BT
Removing the front panel
1 Press the detach button to release the front
panel.
2 Push the front panel upward (M) and then pull it
toward ( N) you.
3 Always store the detached front panel in a protec-
tive case or bag.
Re-attaching the front panel
1 Slide the front panel to the left.
2 Press the right side of the front panel until it is
firmly seated.
Forcing the front panel into place may result in
damage to the front panel or head unit.
Basic operations
Turning the unit on
1 Press SRC/OFF to turn the unit on.
Turning the unit off
1 Press and hold SRC/OFF until the unit turns off.
Adjusting the volume
1 Turn M.C. to adjust the volume.
Selecting a source
1 Press SRC/OFF to cycle between:
DEH-X9600BT
Radio
—CD—USB1/iPod1—App 1 (application1)
—USB2/iPod2—App 2 (application2)—SD—
AUX
—BT Audio
DEH-X8600BT
Radio
—CD—USB/iPod—App (application)—SD
—AUX—BT Audio
Notes
! When this unit’s blue/white lead is connected
to the vehicle
’s auto-antenna relay control
terminal, the vehicle
’s antenna extends when
this unit
’s source is turned on. To retract the
antenna, turn the source off.
! When there are two USB storage devices con-
nected to this unit and you want to switch be-
tween them for playback, disconnect
communications for the USB storage device
first before proceeding.
! If connecting both USB1/iPod1 and USB2/
iPod2 at the same time, use a Pioneer USB
cable (CD-U50E) in addition to the regular
Pioneer USB cable.
Frequently used menu
operations
Returning to the previous display
Returning to the previous list/category (the folder/ca-
tegory one level higher)
1 Press
/ DISP.
Returning to the ordinary display
1 Press BAND/ .
<QRB3358-A>6
En
6
Section
02 Using this unit