Pioneer DEH-X8600BT - Manual (Page 29)

Black plate (29,1)
Troubleshooting
Symptoms are written in bold and causes in
regular, non-indented text. Regular, indented
text is used to indicate actions to be taken.
The display automatically returns to the
ordinary display.
You did not perform any operation within about
30 seconds.
Perform operation again.
The repeat play range changes unexpectedly.
Depending on the repeat play range, the selected
range may change when another folder or track
is being selected or during fast forwarding/rever-
sing.
Select the repeat play range again.
A subfolder is not played back.
Subfolders cannot be played when Folder repeat
(folder repeat) is selected.
Select another repeat play range.
NO XXXX appears when a display is changed
(NO TITLE, for example).
There is no embedded text information.
Switch the display or play another track/file.
The unit is malfunctioning.
There is interference.
You are using a device, such as a cellular phone,
that may cause audible interference.
Move electrical devices that may be causing
the interference away from the unit.
The sound from the Bluetooth audio source is
not played back.
There is a call in progress on a Bluetooth con-
nected cellular phone.
The sound will be played back when the call is
terminated.
A Bluetooth connected cellular phone is currently
being operated.
Do not use the cellular phone at this time.
A call was made with a Bluetooth connected cel-
lular phone and then immediately terminated. As
a result, communication between this unit and
the cellular phone was not terminated properly.
Reconnect the Bluetooth connection between
this unit and the cellular phone.
The Bluetooth device cannot be paired with
this unit.
The information for this unit registered to the
Bluetooth device, or that for the Bluetooth device
registered to this unit, was deleted somehow.
Delete the information for this unit registered
to the Bluetooth device and that for the
Bluetooth device registered to this unit, if not
deleted already. Then, try pairing the Bluetooth
device to this unit again.
Error messages
When you contact your dealer or your nearest
Pioneer Service Center, be sure to note the
error message.
Error messages are written in bold and causes
in regular, non-indented text. Regular, in-
dented text is used to indicate actions to be
taken.
Common
AMP ERROR
This unit fails to operate or the speaker connec-
tion is incorrect; the protective circuit is acti-
vated.
Check the speaker connection. If the message
fails to disappear even after the engine is
switched off/on, contact your dealer or an
authorized Pioneer Service Station for
assistance.
ERROR
The device in use does not support voice recogni-
tion.
Switch to a device that does support voice
recognition.
<QRB3358-A>29
En
29
Appendix
Additional
information
Additional information