Pioneer BDP-51FD - Manual (Page 21)

21
En
03
10 Finish the Setup Navigator menu.
Use
/ to select Finish, then press ENTER.
To redo the settings from the start, select Go Back.
Depending on the output terminal setting of step 4 or the HDMI
cable being used, it may happen that no picture and/or sound is
output. If this happens, the setup returns to step 4 if there is no
operation for over 30 seconds. Once the setup returns to step 4, redo
the settings according to the connected devices and the HDMI
cable being used.
 About the screen saver
The screen saver is automatically activated if there is no operation
for over 1 minute after playback is stopped or paused. The screen
saver turns off when an operation is performed on the player or
remote control.
The screen saver is automatically activated if there is no operation
for over 1 minute after the Home Menu or Home Media Gallery is
displayed while playing a BD or DVD.
With CDs and music files, the screen saver is automatically
activated if no button is operated for over 1 minute, even while the
CD or music file is playing.
Operating the TV with the
player’s remote control
When the manufacturer code for your brand of TV is set on the
player’s remote control, the TV can be operated using the player’s
remote control.
1 Input the 2-digit manufacturer code.
Press the number buttons (0 to 9) to input the code while pressing
TV CONTROL
.
Note
• The factory setting is PIONEER 00.
• If you make a mistake when inputting the code, start over from
the beginning.
• When there are multiple codes for a manufacturer, try inputting
them in the indicated order until the TV can be operated.
2 Check that the TV can be operated.
Caution
• For some models it may not be possible to operate the TV with
the player’s remote control, even for TVs of brands listed on the
manufacturer code list.
• The setting may be restored to the default after the batteries are
replaced. If this happens, reset it.
Setup Navigator
BD PLAYER
Setup is complete!
The setup menu comes back in 30 seconds.
Finish Go Back
TV CONTROL
STANDBY/ON OPEN/CLOSE
AUDIO SUBTITLE ANGLE FL DIMMER
ENTER
INPUT
SELECT CH VOL
AUDIO VIDEO
OUTPUT
RESOLUTION
CLEAR
TV CONTROL
STANDBY/ON OPEN/CLOSE
INPUT
SELECT CH VOL
51FD_WV_EN.book 21 ページ ２００８年８月２６日 火曜日 午前９時５８分