Pioneer BDP-51FD - Manual (Page 55)

55
En
07
Others
HDMI Control function does
not work (continuous). Is HDMI Control set to On on the connected device? Set HDMI Control to On on the connected device. The HDMI
Control function works when HDMI Control is set to On for all
the devices connected by HDMI cable.
Once connections and settings of all the devices are finished,
be sure to check that the player’s picture is output to the Flat
Screen TV. (Also check after changing the connected devices
and connecting and/or disconnecting HDMI cables.) If the
player’s picture is not being output to the Flat Screen TV, the
HDMI Control function may not work properly.
For details, refer to the operating instructions of the connected
device.
Are multiple players connected? The HDMI Control function may not work if three or more
players, including this player, are connected by HDMI cable.
Problem Check Remedy
The power turns off
automatically. Is Auto Power Off set to On? If Auto Power Off is set to On, the power turns off
automatically if no operation is performed for over 30 minutes
(page 43).
Is HDMI Control set to On? The player’s power may turn off together with the power of the
connected TV. If you do not want the player’s power to turn off
when the TV’s power is turned off, set
HDMI Control to Off
(page 42).
The power turns on
automatically. Is HDMI Control set to On? The player’s power may turn on together with the power of the
connected TV. If you do not want the player’s power to turn on
when the TV’s power is turned on, set
HDMI Control to Off
(page 42).
Inputs of connected TV, AV
system and HD AV Converter,
switches automatically. Is HDMI Control set to On? The inputs of the connected TV, AV system (AV receiver or
amplifier, etc.) or HD AV Converter may automatically switch to
the player when playback starts on the player or the menu
screen (Home Media Gallery, etc.) is displayed. If you do not
want the inputs of the connected TV, AV system (AV receiver or
amplifier, etc.) and/or HD AV Converter to switch
automatically, set
HDMI Control to Off (page 42).
Player cannot be operated
with remote control. Is an AV receiver or amplifier connected to the CONTROL IN
terminal on the player’s rear panel?
Operate with the remote control of the device connected to the
CONTROL IN terminal.
Are you operating the remote control from a point too far away
from the player? Operate from within 7 m of the remote control sensor.
Are the batteries dead? Replace the batteries (page 6).
Settings you have made have
been cleared. • Have you disconnected the power cord while the player’s
power was on?
• Has there been a power failure?
If the power cord is disconnected or there is a power failure
while the player’s power is on, the settings you have made may
be cleared. Always press
 STANDBY/ON on the player’s
front panel or  STANDBY/ON on the remote control and
check that POWER OFF has turned off from the player’s front
panel display before disconnecting the power cord. Be
particularly careful when the power cord is connected to the
AC outlet on another device because the player turns off in
conjunction with the device. We recommend plugging the
power cord into a wall outlet whenever possible.
After a disc is inserted,
Loading stays displayed and
playback does not start. Are there too many files recorded on the disc? When a disc on which files are recorded is inserted, depending
on the number of files recorded on the disc, loading may take
several dozen minutes.
 is displayed in file names,
etc. The characters that cannot be displayed on this player are
displayed in
.
The DVD layer of BD and DVD
hybrid discs cannot be
played. Is Hybrid Disc Playback properly set? Set Hybrid Disc Playback to DVD (page 43).
The CD layer of BD and CD
hybrid discs cannot be
played. Is Hybrid Disc Playback properly set? Set Hybrid Disc Playback to CD (page 43).
Problem Check Remedy
51FD_WV_EN.book 55 ページ ２００８年８月２６日 火曜日 午前９時５８分