Pioneer BDP-51FD - Manual (Page 25)

25
En
03
 About the frame/field frequency and NTSC/
PAL TV systems
By factory default setting, the frame/field frequency is set for an
output of 50 Hz, and the video signal output from the
S-VIDEO and
VIDEO output terminals is set to be output in the PAL TV system
format. When sources with a frame/field frequency of 60 Hz or
24 Hz are played, the output frame/field frequency automatically
switches to 60 Hz (or 24 Hz for HDMI, depending on the setting), and
the TV system format for the video signal output from the
S-VIDEO
and VIDEO output terminals is set to NTSC on PAL TV. When
playback is stopped, the frame/field frequency and TV system
settings remain at the settings last used. The frame/field frequency
and TV system settings do not change even when the power is
turned off. They only switch when a video material with a different
frame/field frequency is played.
If the picture is not displayed on the TV when a source with a
different frame/field frequency is played, use the procedure below to
switch the frame/field frequency and TV system settings for the
signal output from the player.
Eject the disc, then press the  OPEN/CLOSE button on the front
panel while pressing the  button to switch to a different frame/field
frequency. The frame/field frequency switches between 50 Hz and
60 Hz each time this operation is performed. The indicator for the
frame frequency’s current setting lights on the front panel display
(page 12).
 About Film material
The film material is a video signal with a frame rate of 24 frames/
second. For example, these materials include 1080/24p, 720/24p,
etc.
 To output film material
To output 1080/24p film material from the HDMI OUT terminal, set
the output video resolution to either Auto or Source Direct.
Caution
• 1080/24p signals can only be output from the HDMI OUT
terminal. They cannot be output from other video terminals.
• When Auto is selected, the picture is output at 60 frames/
second if your TV is not compatible with 1080/24p signals.
• When Source Direct is selected, the signals are output as such,
even if your TV is not compatible with 1080/24p signals. If the
picture is not displayed properly, use
OUTPUT RESOLUTION to
set to the output video resolution at which the picture is properly
displayed.
• 720/24p video signals are output at 60 frames/second, even if
the resolution is set to Auto or Source Direct.
Auto
Output Video Resolution Source : 1080/24p
Current Output : 1080/24p
Video resolution of the
currently playing disc
Output video resolution
from the player
Example:
51FD_WV_EN.book 25 ページ ２００８年８月２６日 火曜日 午前９時５８分