Pioneer BDP-51FD - Manual (Page 53)

53
En
07
Multi-channel sound is not
output. Is the AV receiver or amplifier, etc. connected to the HDMI
OUT terminal, the AUDIO OUT (7.1 ch) terminals or DIGITAL
OUT (COAXIAL/OPTICAL) terminal?
Read the operating instructions of the connected AV receiver
or amplifier and check the audio output settings of AV receiver
or amplifier.
Is Output Terminal Priority properly set? Linear PCM (2-channel) audio signals are output from output
terminals other than the one set at
Audio under Output
Terminal Priority. Set Output Terminal Priority properly
(page 49).
Is the audio output of the connected AV receiver or amplifier,
etc., properly set? Read the operating instructions of the connected AV receiver
or amplifier and check the audio output settings of AV receiver
or amplifier.
Is multi-channel sound selected? Use the menu screen or AUDIO to switch the disc’s sound to
multi-channel.
Is Audio Out set to audio formats supported by the connected
AV receiver or amplifier?
• Read the operating instructions of the connected AV receiver
or amplifier and check the supported audio formats.
• Set Audio Out properly (page 41).
Are Audio Output Mode and Speaker Setup properly set? • When the AV receiver or amplifier, etc., is connected to the
AUDIO OUT (7.1 ch) terminals, set Audio Output Mode to
Multi-channel (page 41).
• Set Speaker Setup properly (page 41).
Digital audio signals are not
output from the
DIGITAL
OUT (COAXIAL/OPTICAL)
terminals (analog audio
signals are output).
Is Audio Out set to audio formats supported by the connected
AV receiver or amplifier?
• Read the operating instructions of the connected AV receiver
or amplifier and check the supported audio formats.
• Set Audio Out properly (page 41).
Noise can be heard when
outputting DTS Digital
Surround signals. Is the connected AV receiver or amplifier compatible with DTS
Digital Surround? If an AV receiver or amplifier that is not compatible with DTS
Digital Surround is connected to the
DIGITAL OUT terminal,
set DTS Out to DTS  PCM. Noise will be heard if DTS Out is
set to DTS (page 41).
192 kHz or 96 kHz digital
audio signals cannot be
output from the
DIGITAL
OUT (COAXIAL/OPTICAL)
terminals.
It is not possible to output 192 kHz or 96 kHz digital audio
signals from this player’s
DIGITAL OUT (COAXIAL/OPTICAL)
terminals. The signals are automatically converted to under
96 kHz for output.
Secondary audio or
interactive audio is not
output. Is HDMI Audio Out properly set? Set HDMI Audio Out to PCM (page 42).
Are Dolby Digital Out and DTS Out properly set? Set Dolby Digital Out to Dolby Digital 1, DTS Out to DTS 1
(page 41).
Sound is fast or slow. When an HDMI cable is connected, are audio signals being
output from devices connected with cables other than HDMI
cables? When this player is connected by HDMI cable to a Pioneer AV
receiver or amplifier compatible with the PQLS function via
HDMI connection, the PQLS function is activated when playing
a music CD (CD-DA). Because of this, the sound output from
components other than the ones connected by HDMI cable
may be fast or slow. If this happens, set
PQLS to Off (page 42).
Files recorded on discs
cannot be played. Is the disc one that is playable on this player? Check whether the disc is one that can be played on this player
(page 7).
Is the file one that is playable on this player? • Check whether the file is one that can be played on this
player (page 9).
• Check whether or not the file is damaged.
Is the file protected by DRM? Files protected by DRM cannot be played (not including DivX
VOD files).
A message indicating low
memory (local storage)
appears while playing a BD-
ROM disc. Erase the BDMV data (page 23).
Problem Check Remedy
51FD_WV_EN.book 53 ページ ２００８年８月２６日 火曜日 午前９時５８分