Toshiba Tecra M11 - Manual (Page 122)

User’s Manual 4-38
Operating Basics
Regulatory Information
FCC compliance
FCC compliance does not apply to this product with a Wireless WAN
Module installed.
Industry Canada (IC) compliance
Industry Canada (IC) compliance does not apply to this product with a
Wireless WAN module installed.
Australia and New Zealand regulatory compliance
This equipment incorporates a radio transmitting device, in normal use a
separation distance of 20cm will ensure radio frequency exposure levels
complies with the Australian and New Zealand Standards.
Wireless communication switch
You can enable or disable Wireless communication functions, with the on/
off switch. No transmissions are sent or received when the switch is off.
Slide the switch to the right to turn it on and to the left to turn it off.
Wireless communication Indicator
The wireless communication indicator shows the status of the computer's
wireless communication functions.
If you used the Taskbar to disable the wireless LAN, restart the computer or
perform the following procedure to re-enable it: Start  Control Panel 
System and Security  System  Device Manager  Network
adapters and right click the wireless device then choose enable.
Indicator status Indication
Indicator off The wireless communication switch is off - no
wireless functionality is available.
Indicator glows Wireless communication switch is on. Except for
the stopped device by the software switch, all the
wireless-communications functions can output a
radio wave.