Using the fingerprint sensor, Using the fingerprint sensor -3, Apter 4 – Toshiba Tecra M11 User Manual

Page 87

Advertising
background image

User’s Manual

4-3

Operating Basics

Replacing the cap

The AccuPoint cap is an expendable item that should be replaced after

prolonged use. The spare AccuPoint cap is supplied with some models.
1. To remove the AccuPoint cap, firmly pinch the cap and pull it straight

up.

Removing the AccuPoint cap

2. Position a new cap on the peg and press it into place.

Using the Fingerprint Sensor

This product has a fingerprint utility installed for the purpose of enrolling

and recognizing fingerprints. By enrolling the ID and password onto the

fingerprint authentication feature, it is no longer necessary to input the

password from the keyboard. Fingerprint feature enables you to:

Logon to Windows and access a security enabled homepage through

Internet Explorer.

Files and folders can be encrypted/decrypted and third party access to

them prevented.

Disable the password-protected screen-saver when returning from a

power-saving mode such as Sleep Mode.

Authentication of the User Password (and, if applicable, the HDD

(Hard Disk Drive) Password) when booting up the computer (boot

authentication).

Single Sign-On feature

1. AccuPoint cap

1

The peg is square, so be careful to align the cap’s square hole with the

peg.

Fingerprint cannot be used in models that do not have a fingerprint

module installed.

Advertising