Toshiba Magnia 550d - Manual (Page 169)

Installing Software
NetWare
153
Proceed with installing operation following the instructions
that appear on the screen.
Installing the NetWare 4.2 manually
NOTE: If “Quick Install” is selected on installing the NetWare
4.2, the driver contained in the NetWare CD-ROM may be
automatically installed depending on the situation. Therefore,
it is recommended to select “Custom Install” on installing the
NetWare 4.2, so that you can use the driver recommended by
us.
Selecting the driver to install the NetWare 4.2
The NetWare installer displays a window to select network
adapters. When you select “Continue without selecting” it
displays a window as shown below.
* ADPT 160M is displayed if SCSI controller-Adaptec 29160N is installed.
The SCSI controller, network adapter, and RAID controller use
the drivers stored on the driver disk that are delivered with your
system. When drivers other than IDEATA are selected in this
message box, select “Select additional or modify selected Disk/
Choose the Server Drivers-Summary
This is a summary of automatically or manually selected devices.
Select additional drivers as needed.
Driver names
Disk and CD-ROM Drivers: > IDEATA
Network(LAN) Drivers >
options
Select additional or modify selected Disk/LAN drivers
Continue installation