Toshiba Magnia 550d - Manual (Page 40)

Getting Started
Removing and replacing the server panels
23
Attaching the front door panel
NOTE: Push the hooks enough into the holes being careful
not to break them.
2 To attach the lower part of the door, fit the latch at the lower
part of the door panel in to the corresponding hole in the server
3 Plug the power cable in to an AC outlet.
Removing the side panel
To remove the side panel, proceed as follows:
1 Shut down and switch off the server if it is in operation.
2 Unplug the power cable from the AC outlet.
3 Release the key-lock and remove the front door panel.