Toshiba SATELLITE M30X - Manual (Page 63)

User’s Manual 4-2
Operating Basics
The Touch pad has similar functions to a two-button mouse with a scroll
wheel. For some functions, you can tap the Touch pad instead of pressing a
control button.
Using optical media drives
The illustrations in this section might differ slightly from your drive, but
operation is the same for all optical media drives. The full-size drive
provides high-performance execution of CD/DVD-ROM-based programs.
You can run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs without an
adaptor. An ATAPI interface controller is used for CD/DVD-ROM operation.
When the computer is accessing a CD/DVD, an indicator on the drive
glows.
If you have a CD-RW/DVD-ROM drive, refer also to the Writing CDs on CD-
RW/DVD-ROM drive section for precautions on writing to CDs.
If you have a DVD Super Multi drive, refer also to the Writing CD/DVDs on
DVD Super Multi drive section for precautions on writing to CDs.
You can customize pointing device actions in Mouse Properties. Open the
Control Panel, select the Mouse icon and press Enter to open the Mouse
Properties window.
Click
Click the left control button or tap the Touch pad once.
Double-click Click the left control button twice or tap the Touch pad
twice.
Scroll
Vertical:
Move your finger up or down the right edge of the Touch
pad.
Horizontal: Move your finger left or right along the bottom edge of
the Touch pad.
Use the WinDVD 5 application to view DVD-Video discs.