Dialing properties, Connecting, Disconnecting – Toshiba SATELLITE M30X User Manual

Page 83

Advertising
background image

User’s Manual

4-22

Operating Basics

Dialing Properties

Select this item to display the dialing properties.

Connecting

To connect the internal modem cable, follow the steps below.

1. Plug one end of the modular cable into the modem jack.
2. Plug the other end of the modular cable into a telephone jack

Connecting the internal modem

Disconnecting

To disconnect the internal modem cable, follow the steps below.
1. Pinch the lever on the connector in the telephone jack and pull out the

connector.

2. Disconnect the cable from the computer in the same manner.

If you are using the computer in Japan, technical regulations described in

the Telecommunications Business Law require that you select Japan

region mode. It is illegal to use the modem in Japan with any other

selection.

In case of a lightning storm, unplug the modem cable from the

telephone jack.

Do not connect the modem to a digital telephone line. A digital line will

damage the modem.

Do not pull on the cable or move the computer while the cable is

connected.

If you use a storage device such as a DVD-ROM drive or hard disk drive

connected to a 16-bit PC Card, the modem's speed might be slow or

communication might be interrupted.

If the modem speed is low or communication is interrupted when you are

using the modem, please ensure the CPU speed is set to Maximum within

the TOSHIBA Power Management Utility.

Advertising