Cleaning the computer, Moving the computer, Cleaning the computer -26 moving the computer -26 – Toshiba SATELLITE M30X User Manual

Page 87

Advertising
background image

User’s Manual

4-26

Operating Basics

Cleaning the computer

To help ensure long, trouble-free operation, keep the computer free of dust

and use care with liquids around the computer.

Be careful not to spill liquids into the computer. If the computer does get

wet, turn the power off immediately and let the computer dry completely

before you turn it on again.

Clean the computer using a slightly damp (with water) cloth. You can

use glass cleaner on the display. Spray a small amount of cleaner on a

soft, clean cloth and wipe the screen gently with the cloth.

Moving the computer

The computer is designed for rugged durability. However, a few simple

precautions taken when moving the computer will help ensure trouble-free

operation.

Make sure all disk activity has ended before moving the computer.

Check the Built-in HDD and Diskette/Optical Media drive indicators

on the computer.

If a diskette is in the diskette drive, remove it.

If a disc is in the optical media drive, remove it. Also make sure the

optical media drive drawer is securely closed.

Turn off the power to the computer.

Disconnect all peripherals before moving the computer.

Close the display. Do not pick up the computer by its display panel or

back (where the interface ports are located).

Close all port covers.

Disconnect the AC adaptor if it is connected.

Use the carrying case when transporting the computer.

If an external display will not be connected next time you use your

computer, you should cancel any extended desktop or clone display

settings before shutting down your computer.
Clone display settings are those where more than one device has been

selected and is simultaneously applicable.

Never spray cleaner directly onto the computer or let liquid run into any

part of it. Never use harsh or caustic chemical products to clean the

computer.

Advertising