Toshiba Qosmio X500 - Manual (Page 131)

User’s Manual 6-10
Power and Power-Up Modes
Installing the battery pack
To install a battery, follow the steps below.
1. Turn the computer's power off.
2. Disconnect all cables connected to the computer.
3. Slide and hold the battery release latch, and insert the battery pack.
4. Move the battery pack lock to its locked position.
Securing the battery pack
TOSHIBA Password Utility
The TOSHIBA Supervisor Password Utility allows you to maintain an
additional level of security and provides two levels of password security:
User and Supervisor.
User Password
To start the utility, point to or click the following items:
Launch TOSHIBA Assist  SECURE  User Password
■ Registered
Click to register a password of up to 8 characters. After a password is set,
you will be prompted to enter it when you start the computer.
■ Not Registered
■ The battery pack is a lithium ion battery, which can explode if not
properly replaced, used, handled or disposed of. Dispose of the
battery as required by local ordinances or regulations. Use only
batteries recommended by TOSHIBA as replacements.
■ Do not touch the latch while holding the computer. If the latch is
unintentionally released, you may get injured by the dropped battery.
1
2
3
1. Battery Pack
2. Battery Pack Lock 3. Battery Release Latch
Passwords set in TOSHIBA Supervisor Password Utility are different from
the Windows ® login password.