Disconnecting an esata device – Toshiba Qosmio X500 User Manual
Page 152
User’s Manual
8-15
Optional Devices
Connecting an eSATA cable to the eSATA/USB combo port
Disconnecting an eSATA device
When you have finished using an eSATA device, you can follow the
procedures below in order to disconnect it:
1. Wait for the indicator light of an eSATA device to go out to make sure all
activity has stopped.
2. Click the Safely Remove Hardware icon on the Windows Taskbar.
3. Select the eSATA device that you want to remove.
4. Carefully pull the eSATA device's eSATA connector out from within the
computer's eSATA/USB combo port.
If you connect an eSATA device after the computer has already been
turned on, it will take about ten seconds for it to be recognized by the
computer.
Do not attempt to disconnect and reconnect the drive before this period
has elapsed.
A connected eSATA device may not be recognized if it is connected to the
computer's eSATA/USB combo port while the computer is in Sleep Mode
or Hibernation Mode. If this occurs, disconnect the eSATA device and then
reconnect the device while the computer is turned on.
If you disconnect an eSATA device or turn off the power while the
computer is accessing the drive, you may lose data or damage the eSATA
device or the drive.