How to delete the fingerprint data, Fingerprint sensor limitations, Set up procedure – Toshiba Qosmio X500 User Manual
Page 80
User’s Manual
4-6
Operating Basics
How to delete the fingerprint data
Saved fingerprint data is stored in the Non-volatile memory inside the
fingerprint sensor. If you hand over the PC to others, or dispose of it, the
following operations are recommended.
1. Click Start All Programs Toshiba Utilities TOSHIBA
Fingerprint Utility. The TrueSuite Access Manager Fingerprint
Software screen is displayed.
2. Enter your Windows Password and click Next to enter the Control
Center, or swipe your enrolled finger to enter the Control Center.
3. Click Delete All Fingerprints.
Fingerprint sensor limitations
■
The fingerprint sensor compares and analyzes the unique
characteristics in a fingerprint.
■
A warning message will be displayed when recognition is abnormal or
recognition is not successful within a fixed duration.
■
The recognition success rate may differ from user to user.
■
Toshiba does not guarantee that this fingerprint recognition technology
will be error-free.
■
Toshiba does not guarantee that the fingerprint sensor will recognize
the enrolled user or accurately screen out unauthorized users at all
times.Toshiba is not liable for any failure or damage that might arise out
of the use of this fingerprint recognition software or utility.
Points to note about the fingerprint utility
■
If the Windows file encryption function EFS (Encryption File System) is
used to encrypt a file, the file cannot be further encrypted using the
encryption function of this software.
■
You can back up the fingerprint data or the information registered to
Password Bank.
■
Please use Import/Export menu on Fingerprint Software Management.
■
Please also refer to the fingerprint utility Help file for more information.
You can start it using the following methods:
■
Click Start All Programs Toshiba Utilities TOSHIBA
Fingerprint Utility. The main screen is displayed. Click Help in the
upper right corner of the screen.
Set up procedure
Please perform the following procedure when first using fingerprint
authentication.