B&B Electronics EIR618-2SFP-T - Manual (Page 23)

Manual Documentation Number: EIR618-2SFP-T_5107m 11
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
Cabling
Twisted-pair segment can be either unshielded twisted pair (UTP) or
shielded twisted pair (STP) cabling. The cable between the link partner
(switch, hub, workstation, etc.) and the converter must be less than 100
meters (328 ft.) long and comply with the IEEE 802.3ab 1000Base-T
standard for Category 5e or above.
Single-mode fiber links must use 9/125μm single-mode fiber cable.
Multi-mode fiber links must use 50/125 or 62.5/125μm multi-mode fiber
cable. The small form-factor pluggable (SFP) is a compact optical
transceiver
To connect the transceiver and LC cable, follow the steps shown below:
First, insert the transceiver into the SFP module. The triangle mark identifies
bottom of the module.
Transceiver to the SFP module