B&B Electronics EIR618-2SFP-T - Manual (Page 57)

Manual Documentation Number: EIR618-2SFP-T_5107m 45
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
authorize] configuration
command to set the
state of the selected
port.
switch(config-if)#8021x portstate
accept
show 8021x E Displays a summary of
the 802.1x properties
and also the port
sates.
switch>show 8021x
no 8021x G Disable 802.1x
function
switch(config)#no 8021x
TFTP Commands Set
Commands Level Description Defaults Example
backup
flash:backup_cfg
G
Save configuration to
TFTP and need to
specify the IP of TFTP
server and the file name
of image.
switch(config)#backup
flash:backup_cfg
restore flash:restore_cfg G Get configuration from
TFTP server and need to
specify the IP of TFTP
server and the file name
of image.
switch(config)#restore
flash:restore_cfg
upgrade
flash:upgrade_fw
G
Upgrade firmware by
TFTP and need to
specify the IP of TFTP
server and the file name
of image.
switch(config)#upgrade
lash:upgrade_fw
SystemLog, SMTP and Event Commands Set
Commands Level Description Example
systemlog ip
[IP address]
G
Set System log server
IP address.
switch(config)# systemlog ip
192.168.1.100