B&B Electronics EIR618-2SFP-T - Manual (Page 65)

Manual Documentation Number: EIR618-2SFP-T_5107m 53
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
IP Configuration
Configure the IP Settings and DHCP client function
„ DHCP Client: Used to enable or disable the DHCP client function.
When enabled, the switch’s IP address is assigned by the network
DHCP server. The default IP address will be replace by the DHCP
server assigned IP address. After clicking the ‘Apply’ button, a popup
dialog will indicate that the current IP will be lost and the new IP
address must be retrieved from the DHCP server.
„ IP Address: A static IP Address may be assigned. The default IP is
192.168.16.1.
„ Subnet Mask: Assign the subnet mask of the IP address. This does
not have to be done if the DHCP client function is enabled.
„ Gateway: Assign the network gateway. The default gateway is
192.168.16.254.
„ DNS1: Assign the primary DNS IP address.
„ DNS2: Assign the secondary DNS IP address.
„ Click Apply
IP configuration interface