Sharp SJ-GC680VSL - Manual (Page 10)

10
To set sound “OFF”
Press the key and key simultaneously and
continuously for 3 seconds or more.
Beep beep beep
Sound ON/OFF
At first, the sound is set “ON”. •
Use this feature when you want to switch the sound of key operation to “ON” or “OFF”. •
It shows the sound “OFF”. The indication will
disappear.
To set sound “ON”
Press the key and key simultaneously and
continuously for 3 seconds or more again.
Beep beep beep
Door Alarm
At first, door alarm is set “ON”. •
When the refrigerator or freezer door is left open, the door alarm will sound. •
The door alarm will sound in 1 minute after opening the door and again after 1 minute (once in each case). •
If the door is left open for approx. 3 minutes, the alarm will sound continuously. •
To cancel operation
1
Press the select key and select the door alarm
indication like the below figure.
2
Press the key. [ : ON, : OFF ]
3
Press the key.
To start operation
It is the same method as canceling operation.
Press the key in step 2.
Flashing
Door alarm indication
(B504)-W.indb 10 2013/11/01 12:26:23