Sharp AX-1110SLM - Manual (Page 13)

11
BEFORE OPERATING BEFORE USING OF THE FIRST
TIME, CLEAN THE OVEN
• Before operating your oven, make sure you read
and understand this operation manual completely.
• Before the oven can be used, follow these
procedures:
1. Ensure the drip tray is in the correct position. See
page 8.
2. See below for getting started.
Your oven has an Energy Save Mode. This facility saves
electricity when the oven is not in use.
P R O C E D U R E
1
Open the door. The display will show ".0".
The oven lamp will light while the door is open. 2
Plug the oven into a power point.
Nothing will appear on the display at this time.
Close the door.
Now you are ready to use the oven. 3
CAUTION:
In Energy Save Mode, if you do not operate the oven
for 3 minutes or more (e.g. after closing the door, or
pressing STOP/CLEAR, or at the end of cooking),
you will not be able to operate the oven until you open
and close the oven door again.
NOTE:
When you set Child Lock or Demonstration Mode, En-
ergy Save Mode will be cancelled temporary.
1. Press STOP/CLEAR if you make a mistake during
programming.
2. STOP/CLEAR can be used to stop the oven
temporarily during cooking.
3. To cancel a programme during cooking, press
twice.
You may detect smoke or a burning smell when using
the grill for the fi rst time, this is normal and not a sign
that the oven is out of order.
To avoid this problem, when first using the oven,
operate the grill without food for 20 minutes.
PREPARATION
Ensure the room is well ventilated.
P R O C E D U R E
1 Ensure that no food is in the oven.
Enter the time by pressing TIME
(20.00).
Press GRILL and
START/AUTO
MINUTE. 2
WARNING:
The oven door, outer cabinet and oven cavity will become
hot.
Getting Started
STOP/CLEAR
x 2
x 1 x 1
AX-1110(SL)M_eng.indd 11 AX-1110(SL)M_eng.indd 11 8/16/2013 11:03:57 AM 8/16/2013 11:03:57 AM