Sharp AX-1110SLM - Manual (Page 25)

23
TROUBLESHOOTING CHART
The following situations are normal and are not signs that the oven is malfunctioning.
* Open the door and close.
* Check the power plug is properly connected to a
suitable wall outlet.
* Check the wall socket and fuse are functioning properly.
* Disconnect the power cord, wait for a minute. Then
reconnect, open and close the door.
* Open the door and close. Is the oven light off? Press
START/AUTO MINUTE again.
* If the message "Err, HOT (fl ashing)" is displayed, wait
until the message has disappeared.
The programmed cooking time and mode will be
cancelled.
Continue to cook with manual mode.
In the following cases, Energy Save Mode
will be cancelled temporary:
- When the door is opening.
- Pause of the automatic cooking.
- When the cooking fan is working after cooking.
- Demonstration mode
- Child lock
- Extend mode
- Drain mode
- Descaling mode
- Kitchen timer mode
- When the display shows "Err, WATER (fl ashing)".
* Check the drip tray is installed correctly. Remove and
replace the drip tray correctly.
See page 8.
* Did you empty the drip tray before the cooking? You
must empty the drip tray and replace it before Steam
Cooking will start. See page 8.
Control panel /
power supply
Energy save
mode
Water
The display is black / blank.
The display is fi ne but START/
AUTO MINUTE will not
function when pressed.
Electrical power supply is
interrupted during cooking.
The display does not change to
blank.
Leakage water from the bottom
front of the oven.
QUESTION / SITUATION ANSWER
AX-1110(SL)M_eng.indd 23 AX-1110(SL)M_eng.indd 23 8/16/2013 11:03:59 AM 8/16/2013 11:03:59 AM