Sharp MX-C381 User Manual
Page 11
10
System settings
*1
When user authentication is enabled, a user cannot configure this setting even when the
authority group gives the user the authority to configure security settings.
(This operation can only be performed by an administrator.)
*2
This will not appear when the product key is entered and the security function is enabled.
Set the items that you wish to
disable. Use this to disable specific
operations to prevent the output of
sensitive document data.
Disabling of Print Jobs Other
Than Print Hold Job
Jobs Completed List Display
Setting
Use this to select whether or not the
job status completed job screen is
displayed.
Job Status Display Setting
Use this to select whether or not
filenames of print jobs and
destination names of image send
jobs are displayed in the job status
screen.
Release Lock on File/Folder
Operation
Use this to release locked files and
folders.
*2
Register the product key.
●
The above system settings can also be configured in the Web page of the
machine. However, the product key for the data security kit cannot be entered
in the Web page. Use the touch panel of the machine to enter the product key.
●
When the data security kit is installed, the "IP Address Setting" does not
appear in the system settings.
Setting
Page
Explanation
Back
Jobs Completed List Display Settings
Enable/Disable Settings
Data Clearance Settings
IEEE802.1X Setting
IPsec Settings
SSL Settings
System Settings
Security Settings