Sharp MX-C381 - Manual (Page 26)

25
Document Control Setting
Step 2: Touch the [Bk(Black)] key, [C(Cyan)] key or [Y(Yellow)] key.
The key of the color set in the print color setting of the system settings is initially highlighted.
After touching one of the keys, touch the lower [OK] key to return to the special modes
menu screen.
Step 3: Select settings as desired from the special modes menu screen and then press
the [COLOR START] key or the [BLACK & WHITE START] key.
Settings for the document control
function in the system settings.
Special Modes screen
Document Control
Print Select
(Copy) setting State of the Print Color
Settings (copy)
checkbox
[Document Control]
key display
Following steps
[Not Printing] - Grayed out Not available
[Always Print] Highlighted Go to step 2
Highlighted When the key is
touched, a beep
sounds to indicate that
the key is not available.
[Allow User to Select] Normal display Go to step 2
Normal display When touched, the key
is highlighted and the
function is enabled.
● If either the [C(Cyan)] key or the [Y(Yellow)] key is touched in step 2, the
[BLACK & WHITE START] key cannot be pressed.
When the color mode is set to any mode other than full color, the [COLOR
START] key cannot be pressed.
● When the color mode is single color, document control pattern printing is not
possible.