Sharp MX-C381 - Manual (Page 29)

28
Document Control Setting
Step 2: If the [Allow User to Select the Print Color] checkbox is selected in [Document
Control Print Select] in the system settings, touch the [Bk (Black)] key, the [C
(Cyan)] key or the [Y (Yellow)] key.
The key of the color selected in [Print Color Setting] in the system settings is initially
selected. However, if the color mode of the stored file is set to a mode other than full color,
[Bk(Black)] will be selected and it will not be possible to change the setting to [C(Cyan)] or
[Y(Yellow)].
After touching one of the keys, touch the upper [OK] key.
Step 3: Touch the [Print and Delete the Data] key or the [Print and Save the Data] key.
■ Using the document control function in Internet Fax Receive/
Fax Receive/List Print modes
No special operation is required. When printing takes place, a black and white document
control pattern is embedded according to the document control function settings in the
system settings.
■ Body text commands for E-mail Direct Print
The command below can be entered in the body text of a direct print e-mail to specify
whether or not a document control pattern is to be printed.
Function Command name Value Entry example
Pattern printing
ON/OFF DOCUMENTCONTROL ON
OFF DOCUMENTCONTROL=ON