Switching on the appliance, Risk of scalding, Note – Neff C47C62N3GB User Manual

Page 11: Press the start button, Fill water tank?" message, Heating indicator, Temperature reached (fig. a), Appliance reheating (fig. b), Current temperature, Displaying and changing the cooking time

Advertising
background image

11

Switching on the appliance

:

Risk of scalding!

When you open the appliance door and remove the cooking
containers, hot liquids may squirt out because the cooking
containers may have warped. When opening, do not stand too
close to the appliance. Open the appliance door carefully.
Remove the cooking container carefully. Keep children at a
safe distance.

Note: Always use the cooking container and wire rack in their

standard position (not the other way up).

1.

Press the operating mode selector to make it pop out.
The appliance switches on. "Appliance is ready for use"

appears in the text display.

2.

Turn the operating mode selector until the desired operating

mode appears on the text display.
A default temperature appears on the temperature display.

3.

Turn the temperature selector to change the default

temperature.

For operating modes that use steam, a default cooking time

appears in the electronic clock. The

KJ

and

x

(cooking

time) symbols light up.

4.

Turn the rotary selector to change the default cooking time.
The new cooking time is saved automatically after 3 seconds.
You can also set the cooking time for operating modes that

do not use steam (see section: Electronic clock).

5.

Press the Start button.
If you do not press the Start button, a signal sounds and

"Press Start button" appears in the text display.

When using

é

Steam cooking, the cooking time does not start

until the heating-up time has elapsed.

"Fill water tank?" message
This message appears if you set an operating mode and the

water tank is only half full.
If you think that the water in the water tank is sufficient for the

cooking procedure, you can start the appliance. If not, fill the

water tank to the "max" mark, slide it back in and start the

appliance.

Heating indicator
The heating indicator displays the rising temperature in the

cooking compartment.

Temperature reached (fig. A)

Appliance reheating (fig. B)

Current temperature
Press the

±

info button.

The current temperature is displayed for 3 seconds.

Displaying and changing the cooking time.
Press the

KJ

clock function button repeatedly until the

KJ

and

x

symbols light up. The current cooking time is displayed.

Turn the rotary selector to change the cooking time. The

change is saved automatically.

Changing the temperature
You can change the temperature at any time. To change the

temperature, turn the temperature selector until the required

temperature is displayed.

Pause
Briefly press the Stop button to interrupt cooking (pause). The

cooling fan may continue running. Press the Start button to

restart.
If you open the appliance door during cooking, operation is

interrupted. Close the appliance door and press the Start

button to restart.

If you have switched on the Auto start, there is no need to

restart the appliance (see section: Basic settings).

"Fill water tank" message
If the water tank is empty, a signal sounds. “Fill water tank”

appears on the display. Cooking is interrupted.

1.

Open the appliance door carefully.
N.B.: Hot steam will escape.

2.

Remove the water tank, fill up to the "max" mark and slide the

tank back in.

3.

Press the Start button.

Switching off the appliance

:

Risk of scalding!

Hot steam may escape when the appliance door is opened.
Open the appliance door carefully during or after cooking.
When opening the door, do not lean over it. Ensure that,
depending on the temperature, steam is not visible.
Press and hold the Stop button to stop the cooking operation.
If you have set a cooking time, cooking is ended automatically.

A signal sounds. Press the

KJ

clock function button to stop

the signal.
The cooling fan may continue to run when you open the

appliance door.
Turn the operating mode selector back to the

Û

position and

push it in to turn off the appliance.
You can see in the temperature display whether there is high or

low residual heat in the cooking compartment.

Operating mode

Temperature range Default cooking

time

Steam

35 - 100 °C

20 minutes

CircoSteam®

120 - 230 °C

30 minutes

Hot air

30 - 230 °C

-

Reheat

100 - 180 °C

10 minutes

Prove

35 - 50 °C

30 minutes

Defrost

35 - 60 °C

30 minutes

Slow cook

60 - 120 °C

-

Plate warming

30 - 70 °C

-

Keep warm

60 - 100 °C

-

6WHDPFRRNLQJ

Temperature display

Text display

Residual heat high

œ

Residual heat low

$

%

Advertising