Replacing the oven light bulb, Risk of electric shock, Turn the glass cover anticlockwise and remove it – Neff B45C52N3GB User Manual

Page 34: Screw on the glass cover again, Note, Changing the door seal, Unhooking the door seal, Hooking in the door seal, Check that the door seal is seated correctly, After-sales service

Advertising
background image

34

Replacing the oven light bulb

Replace faulty oven light bulbs.
You can obtain replacement light bulbs from customer service

or specialist retailers: E14, 220 - 240 V, 40 W, heat resistant to

300 °C. Only use these oven light bulbs.

:

Risk of electric shock !

Disconnect the appliance from the power supply. Switch off the
circuit breaker or remove the fuse from the household fuse box.

1.

Place a tea towel in the cold cooking compartment to prevent

damage.

2.

Turn the glass cover anticlockwise and remove it.

3.

Replace the oven light bulb with a bulb of the same type.

4.

Screw on the glass cover again.

5.

Remove the tea towel and switch on the circuit breaker.

Note: If the glass cover cannot be unscrewed: use rubber

gloves to turn it. You can order a special removal tool through

the after-sales service (order no. 613634)

Changing the door seal

If the door seal is defective, it must be replaced. Replacement

seals for your appliance can be obtained from the after-sales

service.

Unhooking the door seal
The door seal is fixed in nine places.

1.

Unhook (Fig. B) the door seal at four points (Fig. A).

2.

Hook the door seal in at five further points (Fig. C) by turning

the hooks slightly (Fig. D).

Hooking in the door seal

1.

Hook (Fig. B) the door seal in at four points (Fig. A).

2.

Hook the door seal in at five further points (Fig. C) by turning

it slightly (Fig. D).

3.

Check that the door seal is seated correctly.

After-sales service

Our after-sales service is there for you if your appliance needs

to be repaired. We will always find the right solution in order to

avoid unnecessary visits from a service technician.

E number and FD number

When calling us, please give the product number (E no.) and

the production number (FD no.) so that we can provide you with

the correct advice. The rating plate containing these numbers

can be found on the base of the appliance when you open the

appliance door.
To save time, you can make a note of the number of your

appliance and the telephone number of the after-sales service

in the space below, should it be required.

Please note that there will be a fee for a visit by a service

technician in the event of a malfunction, even during the

warranty period.
Please find the contact data of all countries in the enclosed

customer service list.

To book an engineer visit and product advice

Rely on the professionalism of the manufacturer. You can

therefore be sure that the repair is carried out by trained service

technicians who carry original spare parts for your appliances.

$

%

&

'

E no.

FD no.

Aftersales service

O

GB

0844 8928989

Calls from a BT landline will be charged at up to

3 pence per minute. A call set-up fee of up to 6 pence

may apply.

IE

01450 2655

0.03 € per minute at peak. Off peak 0.0088 € per

minute.

Advertising