Changing the pattern size – Brother NX-450 User Manual
Page 123
UTILITY STITCHES
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
122
b
Press
or
(Stitch length keys) until
is displayed.
X
The screen for checking the pattern appears.
c
Press
or
(Stitch width keys) to scroll
through the pattern and check it.
• Press
to scroll through the pattern to the left. If
the key is pressed while the leftmost (first) pattern is
displayed, a beep sounds.
• Press
to scroll through the pattern to the right.
If the key is pressed while only the rightmost (last)
pattern is displayed, a beep sounds.
d
Press
(OK key) or
(Cancel/clear
key).
X
The initial stitch screen appears again.
Changing the pattern size
The size of character stitches in the Gothic font (
selected with
) and outline style (
selected
with
) can be switched between large and small.
However, the size of other patterns cannot be
changed. For details on the stitch patterns whose size
can be changed, refer to “Other stitches” (page 138).
a
Select a stitch.
Select a pattern whose size can be changed.
b
Press
(Settings key) in the operation
panel.
X
The settings screen appears.
c
Press
or
(Stitch length keys) until
is displayed.
X
The screen for changing the pattern size
appears.