Brother NX-450 - Manual (Page 53)

SEWING BASICS
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
52
Starting to sew
Once you are ready to start sewing, you can start the
sewing machine. The sewing speed can be adjusted
using either the sewing speed controller or the foot
controller.
Note
Important:
z When the foot controller is plugged in,
(“Start/Stop” button) cannot be used to start
or stop sewing.
■ Using the operation buttons
Sewing can be started and stopped using the
operation button
(“Start/Stop” button).
a
Slide the sewing speed controller to the left or
right to select the desired sewing speed.
Slide the sewing speed controller to the left to
sew at a slower speed, or slide the speed
controller to the right to sew at a faster speed.
a Sewing speed controller
b
Press (“Start/Stop” button) once.
a “Start/Stop” button
X The machine starts sewing.
• If you continue to hold (“Start/Stop”
button) pressed immediately after the sewing
starts, the machine will sew at a slow speed.
c
When the end of the stitching is reached, press
(“Start/Stop” button) once.
X The machine stops sewing with the needle
down (in the fabric).
d
When you are finished sewing, raise the
needle, and then cut the threads.
X For details, refer to “Cutting the thread”
(page 55).
■ Using the foot controller
Sewing can be started and stopped using the foot
controller.
a
Turn off the sewing machine.
When connecting the foot controller, be sure to
turn off the sewing machine in order to prevent
the machine from accidentally being started.
1
1