Entering the pattern data – Brother NX-450 User Manual
Page 131
UTILITY STITCHES
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
130
Entering the pattern data
Follow the pattern drawn on the grid sheet and
program the pattern into the sewing machine.
a
Attach monogramming foot “N”.
• For details, refer to “Replacing the presser
foot” (page 41).
b
Turn on the sewing machine.
c
Select
(No. 99 of
, selected with
).
Press
(Decorative stitch key), and then use
the numeric keys to type in “99”.
X
The screen for entering a pattern appears.
a Number of the current point/Total number of
points
b Horizontal coordinate (0–79)
c Vertical coordinate (0–14)
d
Check the grid sheet set, and specify the
coordinates of the first point.
Press
and
(Stitch width keys) to select
the horizontal coordinate and press
and
(Stitch length keys) to select the vertical
coordinate, and then press
(OK key).
a Stitch width keys
b Stitch length keys
e
Specify the coordinates of the second point,
and then press
(OK key).
X
A screen appears, allowing you to specify
the settings for the stitching between the two
points.
f
Specify whether single stitching or triple
stitching will be sewn between the points.
Press
and
(Stitch width keys) to select
for single stitching or for triple stitching,
and then press
(OK key).
X
A screen for selecting the next operation
appears.
1
2
3
1
2